The Dovetail Diaries

The advancement of one man's woodworking skills.

Showing posts with label plane. Show all posts
Showing posts with label plane. Show all posts

Wednesday, April 14, 2010

Hand Plane 101

My wood plane technique has developed by watching Renaissance Woodworker videos along with the clumsy fumbling that is often referred to as 'experience'.  Those of you who read my earlier posts on the Shaker side table may have realized how surprised I was at the results of my efforts.  I simply did not expect it to work as well as it did.  Even though I was pleasantly surprised, I wasn't quite satisfied with the results.  I'm always looking for a way to do something better, faster or more efficiently and this is no exception.

I figured that I had a couple of choices to help improve my knowledge of plane usage, and since Roy Underhill wouldn't return my calls I decided to purchase one of Christopher Schwarz's videos on hand plane usage.  It was a tossup between "Handplane Basics" , "Building Furniture With Hand Planes", and "Coarse, Medium, and Fine".  After considering the description of each video, I ordered "Handplane Basics: A Better Way to Use Bench Planes".

The video is 71 minutes long and promises that after watching you'll know how to select the proper plane for the job, sharpen the iron appropriately, and use the plane properly to make "perfectly flat and gleaming panels".  In my opinion, it delivers on all three promises.

Different types of bench planes are discussed and viewers are instructed on how both the length and width of a plane affects its usage. Christopher relates the three basic functions of a plane and how a particular plane and iron combination would work better for each function. 

Christopher also demonstrates how to true all six sides of a board.  I don't know why, but it was a surprise to see that the ends of the board were trued using a plane and shooting  board.  It may be obvious to an experienced hand plane user, but I hadn't even considered using the plane for this, instead using my table saw and crosscut sled.  I blame Norm.  (Just kidding!)

I've been trying to decide which plane to purchase next, a long plane for jointing, or a better smoothing plane than the Dunlap 3DBB that I'm currently using.  Thanks to this video I've decided that the next plane will be a long plane or jointer-sized plane, probably a Lie-Neilsen No. 8.

In my opinion this video was very informative and answered many of my questions.  Some things were covered that I hadn't even thought of yet.

In the end it reinforced the need for a good workbench. And a shooting board.  The workbench will have to wait until after my back-ordered copy of  Schwarz's 'Workbenches' arrives, but I'm already scouting scrap material for a shooting board.

Saturday, March 13, 2010

Just Plane Easier Than I Thought It Would Be




I had a problem.  I needed to face joint the 5" side aprons for the Shaker side table, but my small jointer has a capacity of 4 3/8".  Obviously I was going to have to come up with an alternative.  I thought about making a sled from a sheet of 3/4" MDF, shimming the aprons pieces so they didn't rock and then running them through my 12 1/2" portable thickness planer.  The only problem was that I didn't have a piece of MDF large enough and really didn't feel like driving into town and wrestling with a 4' x 8' sheet of 3/4" MDF.

I decided to try my hand at planing one face flat and then running through the thickness planer.  I've never done this before, but I've seen the process done in a podcast from Shannon, The Renaissance Woodworker.  You can watch this in his podcast "RWW 77 A Contemporary Chest of Drawers".  The segment appears near the end of the podcast and he's flattening a panel for the chest of drawers. (Edit: Shannon presents a much more detailed demonstration in "RWW 30 - Thicknessing Stock The Old Fashioned Way", which I just discovered today as I work my way through his podcasts.)

Because I don't have a proper workbench, my biggest challenge was securing the board.  My angled passes were done by holding the board with one hand and pushing the plane with the other.  Obviously not an ideal situation, but effective nonetheless.  My straightedge reference was the table on my tablesaw.

How did it work?  Much better than I thought.    I was extremely nervous about trying this on my first 'fine' woodworking project.

Maybe it was beginner's luck, or maybe handplanes are not as difficult to use as I had imagined.  I know that I won't hesitate to grab one the next time I need to level a board.

Now to find the right workbench and an adequate straightedge...

Update on the epoxy patch:

If you've read the previous posting you'll see that I was planning to use epoxy to patch a crack in one of the table legs.  I ran a test on one of the cutoffs from the leg tapering operation.  As you can see in the photo, even with boiled linseed oil the results were okay, but not great.



I used straight epoxy because I had cleaned up so well that I couldn't find any sawdust to mix with the epoxy.  This evening I remembered to save some from the apron machining so I'll try it again with some sawdust for color.